Howard_silver

If your S204 is a C180, it is not a diesel. The Diesels had a distinct configuration concerning the placement of the batteries.

The vehicle is equipped with COMAND NTG4, bigger genuine 17" wheels, and HID headlights, indicating a higher-specification 'Sport' edition, maybe the 'AMG Line'. In summary, it was well-equipped at release. It is essential to scan for fault codes; the EML may indicate a little issue or a significant expense. Your associate should provide funds for a new air vent to replace the one destroyed by the mobile phone holder.

It may be advantageous to get a VCDS system for personal usage, since they are very effective.

I usually make an effort to search for vehicles equipped with PSA engines, as they often exhibit superior durability and experience less wear over extended periods. This is likely because PSA cars do not handle as well as Mini cars, resulting in Minis being subjected to more intense and prolonged use.

The issue at hand is that I currently have a worn N14 Cooper S engine. To find a suitable replacement, I had to examine five different engines. Now, I have a strategy in place where I ask sellers to remove the first end caps and send me pictures before making a purchase. I recommend checking eBay or contacting Kernow Mini Spares. When reaching out to them, mention that Mini Mike from the forum referred you and specify that you need a N14 engine with good cams. Location: Unit 4 Wheal Rose Business Park, Roche Rd, Bugle PL26 8PP Operating Hours: Closed ⋅ Opens at 8:30 am Monday Contact number: 01726 337146 Subsequently, I suggest use eBay to get a suitable journal. It is worth mentioning that searching for these items may be time-consuming and may result in unsuccessful attempts.

Currently, I have a car that I previously serviced more than a year ago. During the service, I informed the owner that the engine head was in poor condition and that the oil light was not functioning properly before the service. Unfortunately, the timing chain snapped before the owner recently contacted me, acknowledging that I was correct. They asked for advice on what to do next. My response is that they will need to invest more money to replace the engine head and potentially face a similar outcome if the grooves on the engine head are worn down.

If the repair is not done correctly, you will reassemble it and it will produce a pleasant sound. This will bring you great joy as the issue is resolved. Afterwards, you can drive the vehicle or keep it stationary while maintaining a throttle lock at 2500 revolutions per minute until the cooling fans activate intermittently. Subsequently, you can allow the engine to idle, but be aware that the low oil pressure warning light on the dashboard may illuminate due to the release of pressure from the camshaft. If this issue is left unaddressed, it may result in the need for a new turbocharger, as well as the additional tasks of finding a new cylinder head, gasket, and bolts. This process will require a significant amount of time and effort. It is important to approach this situation with a realistic perspective, as these engines tend to have unfavourable outcomes.

The main issue with N14 engines is that they tend to overheat and experience oil deficiency. While the bottom end may be in good condition, these engines often suffer from camshaft wear, particularly if there are grooves present. It is becoming increasingly difficult to find replacement heads without grooves. Alternatively, one could consider looking into PSA engines THP, which are essentially the same as N14 engines but without any additional components. I will be working on one of these engines next week, specifically from a 207 GTI into a Cooper S, and will be refreshing it. I highly recommend honing the engine and installing better rings. The recommended option for oil rings is the 3 piece oil rings, specifically the FAI PR12-000 standard. Another suitable choice is the SM RS1600 std, which also has 3 piece oil rings and is considered the most optimal solution.

What is the reason behind the relatively low prices of R8 cars in Europe? That amount is equivalent to a significant sum of money in the United States.

What is the purpose if they have no impact. Financially imprudent.

Thank you for providing the information. I don't believe I will pursue it further.

Thank you for your response. Did you see any discernible variation in the handling or not?

Greetings, individuals.I am considering installing wheel spacers on both the front and back of my 2015 S5. Could you please share your experience with these or provide recommendations for my specific vehicle?

In my opinion, several seat designers and constructors have acquired valuable knowledge from Recaro over the years.

I believe that the Emirates A380 aircraft we travelled on during our recent trip to Mauritius were equipped with Recaro seats. I regarded them to be satisfactory.

It is disheartening to see this, since Recaro has consistently produced exceptional vehicle seats over the years.

Apply a layer of copper oil over the area where the wheel will be attached.

My 2006 E90 330d was equipped with a Diesel Particulate Filter (DPF). To determine whether your vehicle has a DPF, inspect the tailpipes. whether they are straight, it indicates the presence of a DPF. Conversely, if the tailpipes are pointed downwards, it suggests that the vehicle does not have a DPF.

Indeed, I anticipated that it would be costly, considering the typically high prices associated with most MB products. Regrettably, an automobile lacks value in the absence of a suspension system.

My mine has been thoroughly examined by two very skilled mercenary experts, but unfortunately, they were unable to find a solution. As a result, I am now attempting to fully remove the air system.

Thank you. I have replaced almost all of it, totaling over 3,000 units, across two separate garages. Due to the extensive amount of time my automobile spent in the garage, I decided to purchase another vehicle.

I own a 2012 E250 W212 Estate that has consistently shown issues with its rear air suspension. Does anybody know whether it is possible to uninstall the airbags and replace them with springs to create a traditional springs/shock absorber system? I am selling the automobile and I am looking for the lowest feasible price. What kind of springs are employed, if it is possible to achieve?

I request that you provide us with regular updates on this matter as I will be closely monitoring it.

If it is successful

There is no consensus.