Alex1978 Posted 29 minutes ago Share Posted 29 minutes ago In my 2004 R53, there is a vacuum hose leak. My neighbour is a licensed mechanic, and with his help and some trial and error with carb cleaner and brake clean sprayed on the PCV clips—which I knew were in bad shape from when I serviced the mini supercharger last summer—and Google AI, we have determined that this is probably the issue. I needed a solution for my vehicle's rough idle and lack of power brakes. After spraying carb cleaner into the red PCV clilps using a straw attached to the can, we experienced a brief improvement in idle quality. I need to know if I need to remove the supercharger or put the car in front-end service mode in order to access these clips and replace them with upgraded EFI clamps and tubing. Of course, taking the supercharger unit out would be my first choice if I were looking for a simple solution. If anyone has any information to share about this, I would greatly appreciate it. I would prefer not to waste time by investigating things further. After extensive testing, I am confident in saying that the problem is a vacuum leak and not a power brake booster. I would greatly appreciate your guidance. I am incredibly grateful. Quote Link to comment Share on other sites More sharing options...
Alex1978 Posted 29 minutes ago Author Share Posted 29 minutes ago https://www.amazon.co.uk/s/?search-alias=aps&field-keywords=Mini+Cooper+R53 Quote Link to comment Share on other sites More sharing options...
Alex1978 Posted 29 minutes ago Author Share Posted 29 minutes ago Amazon.co.uk : carb cleaner Quote Link to comment Share on other sites More sharing options...
Alex1978 Posted 29 minutes ago Author Share Posted 29 minutes ago Zodazoqa PCV Crankcase Vent Valve for Mini Cooper R50-R53, Heat-Resistant | OEM 4693369AA 11127577568 11127513082 11127829990, Heat Resistant Engine Vent Control Valve Replacement : Amazon.co.uk: Automotive Quote Link to comment Share on other sites More sharing options...
Alex1978 Posted 29 minutes ago Author Share Posted 29 minutes ago Amazon.co.uk : Google AI Quote Link to comment Share on other sites More sharing options...
Chrishazle Posted 28 minutes ago Share Posted 28 minutes ago Required smoke machine or similar device, such as a Mevyvac tool (see below for link). Quote Link to comment Share on other sites More sharing options...
Chrishazle Posted 28 minutes ago Share Posted 28 minutes ago https://go.skimresources.com/?id=130832X1595941&isjs=1&jv=15.7.1&sref=https%3A%2F%2Fwww.mini2.com%2Fthreads%2 Quote Link to comment Share on other sites More sharing options...
keithmerc220 Posted 27 minutes ago Share Posted 27 minutes ago In my experience, disabling the supercharger does not require entering service mode. After removing the intake and intercooler, the PCV clips should be located directly beneath the charger, which emerges from the top of the engine. You won't need service mode for this job because it allows you to access the engine's front end. Quote Link to comment Share on other sites More sharing options...
Chrishazle Posted 27 minutes ago Share Posted 27 minutes ago Sitting on top of the engine, the supercharger pulls the front end away from the workstation for about 20 minutes, making the job much easier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.