alpaco45 Posted 1 hour ago Share Posted 1 hour ago My R55 Clubman has exhibited a dashboard light problem in recent months, which I have traced to the left rear light cluster. The indicator primarily malfunctions, albeit it operates intermittently at times. Although it now sometimes also affects the brake light. I am unable to predict the efficacy of my indication. Indicates a defect in the light cluster rather than in the individual bulbs. Has anyone encountered a comparable experience? Quote Link to comment Share on other sites More sharing options...
WordSmith Posted 1 hour ago Share Posted 1 hour ago The plastic around the bulb holder can be melted; new holders are available from BMW at a reasonable cost. Occasionally, the light unit itself may also be damaged. Additionally, instances of incorrect bulb types being used have been observed. Quote Link to comment Share on other sites More sharing options...
Rashman4u Posted 1 hour ago Share Posted 1 hour ago I possess a comparable issue. The left turn signal and backup light are reported as nonfunctional; nevertheless, upon inspection, all bulbs illuminate. I have attempted to clear the code, but it reappears. It also indicates that my adaptive lights are defective, however their movement up and down is observable. I have adapted to the complaints; however, I am unable to reset functions such as oil changes since the warning persists and prevents me from clearing it to perform the reset. I suspect it is a computer issue. For a 2011 Mini, the expense of attempting resolution is not justified. I would sell the car if my wife did not cherish it so deeply! Quote Link to comment Share on other sites More sharing options...
Ortsmatt Posted 1 hour ago Share Posted 1 hour ago Quote Link to comment Share on other sites More sharing options...
Ortsmatt Posted 1 hour ago Share Posted 1 hour ago I recently encountered the same issue with my 2016 Mini Cooper S F56. The brown ground wire shorted and melted the clip connecting it to the rear light cluster. It also caused a malfunction in the light cluster. Replaced the light cluster, installed a new clip, and established a new ground connection. Quote Link to comment Share on other sites More sharing options...
Ortsmatt Posted 1 hour ago Share Posted 1 hour ago Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.