All Activity

This exhibits all the indications of residual air in the system; what method are you employing to bleed it?

For what it's worth, it appears to me to be predominantly a clutch problem. Engaging the clutch pedal yields a marginal impact, which strongly indicates a hydraulic issue (potentially sparing you the time and effort of gearbox removal). Have you inspected the slave cylinder, which is relatively accessible compared to the gearbox?

If it is the concentric bearing, a fluid leak should be observable at the base of the bell housing; thus, if it is dry, the issue pertains to the clutch, necessitating the removal of the gearbox for thorough inspection.

I appreciate your response. Inspected the entire hydraulic line and found it completely dry. I suspect it may be an internal issue, possibly involving one of the cylinders, the clutch plate, or perhaps a bearing.

I appreciate your response. I will attempt to replace the brake fluid and re-bleed the system.

Is there any liquid present on the floor behind the clutch pedal? It may be beneficial to inspect behind the pedal to determine if it is damp.

It seems like a clutch issue, either with the master or slave cylinder, even though you've bled the slave. Since you said that it engages after a few pumps of the pedal, I'd say it's either the master or the slave. Good luck!

Salutations, everyone! A 2011 Mercedes Vito W639 RWD 2.1 Diesel is in my possession. With the engine turned off, it shifts smoothly into any gear after I adjusted the cables, which were the Mercedes-specific parts, and the gear selector arms. I feel like I'm missing a clutch because the engine won't shift into any gear when I turn it on. A year ago, a new clutch kit called LUK (3 pieces) was introduced. After inspecting the clutch and bleeding it from the gearbox side, everything appears to be in good working order. I can quickly shift into first or second gear without crunching if I press down on the clutch pedal five to eight times. It starts up normally in any gear when the engine is off, and the clutch bites where it should, but as soon as I shift into neutral, the clutch becomes inoperable, as if it were defective. Has anyone else experienced this problem, and if so, what could be causing it? What lies ahead for me? Is it a clutch problem? I don't believe so. Is there a problem with the clutch operating? The clutch slave cylinder is new, so it could be the pedal cylinder. From the engine side fluid bottle to the brake pedal to underneath the gearbox side, I have not detected any fluid leaks anywhere in the system. Your guidance is greatly appreciated. My sincere appreciation

🙂

By any chance, were you a Kia dealer in Botley, Southampton? Then I wholeheartedly agree; if that's the case, send me a private message.

Gotta love that new ride! 🚗

Leapmotor B10 | Leapmotor Forum

For some reason, I just can't fathom why you don't see one. Searching Google for "leapmotor forum uk" took all of a few seconds.

I can't say much bad about the Niro EV4 itself after three years, but the dealer's service department isn't exactly top-notch, so I'm thinking it's time to upgrade. Still, I've decided to get a Leapmotor B10 because of how much it costs and how much value it provides. The only features I'll miss are a head-up display and an opening sunroof, but other than that, it's got everything I need and more. Thanks again for all the advice and assistance; now I'm just hoping to locate a Leapmotor-specific forum; I haven't been able to do so yet.

Just right.

Amazon.co.uk : BMW

I opted for the HU 6014/1 z MANN oil filter and the BMW Twinpower Longlife-04 5W30 motor oil.

Personally, I'd also recommend 5w30.

You said that my car requires 5w-30 oil.

On subsequent generations of vehicles, including yours, FE oil has superseded LL04. Simply enter your vehicle's model on the Opie Oils website, and the site will return results tailored to your vehicle.

The most common oil for BMWs is 5w-30 LL-04, but you should check your owner's handbook. Hopefully, it will tell you that. Also, unless you want your warranty voided, you should never use AI for important decisions—or anything, really.

Amazon.co.uk : BMW

Amazon.co.uk : X3

Hey there! I would like to schedule an oil change for a 2020 BMW X3 xDrive30e Hybrid with 130,000 kilometers on the odometer (VIN: WBATS110709D47624). I am at a loss as to which option to select. There is a lot of disagreement online, and when I attempted to use AI to help me decide between the two oils, it gave me conflicting advice: 0W-20 BMW TwinPower Turbo LL-17 FE+ or 5W-30 LL-04 BMW TwinPower Turbo Engine Oil, both made by BMW, 1000 ml each.

https://www.amazon.co.uk/s/?search-alias=aps&field-keywords=Kia+heated+steering+wheel