ForumGuru Posted 12 minutes ago Share Posted 12 minutes ago How much would it cost to replace the brake pads and discs on a 2012 Evoque? Much obliged. Quote Link to comment Share on other sites More sharing options...
DreamWeaver Posted 12 minutes ago Share Posted 12 minutes ago Anticipate a substantial amount! Installing high-performance Brembo or Ate kits would be just as affordable, if not cheaper. Quote Link to comment Share on other sites More sharing options...
DreamWeaver Posted 12 minutes ago Share Posted 12 minutes ago https://www.amazon.com/s?ascsubtag=v1-90dea8-30503-f5c1f28262-b&k=Brembo Quote Link to comment Share on other sites More sharing options...
ForumGuru Posted 11 minutes ago Author Share Posted 11 minutes ago range of prices? Quote Link to comment Share on other sites More sharing options...
DreamWeaver Posted 11 minutes ago Share Posted 11 minutes ago In Greece, I replaced all four sets of front brake pads about a year ago, and the original Land Rover ones cost around 170€. However, I noticed that the pads had the Ate logo stamped on them, right below the Land Rover logo, so I bought them directly from an Ate dealer in my area, where they were cheaper. Brambo discs Quote Link to comment Share on other sites More sharing options...
Paqngo Posted 10 minutes ago Share Posted 10 minutes ago I recently upgraded my bike's front brakes with Brembo Xtra discs and pads. Pads cost £55 and discs £70 apiece. In accordance with the maintenance plan, I spent an extra £19 on Pagid DOT4 from Eurocarparts and four calliper bolts and two disc screws from the main dealer. The calliper bolts could be cleaned and reused; the pistons and boots were in fine shape, and my vehicle has the smaller 300mm discs. My L538 is one of the earlier models without brake pad wear sensors, so when mine finally wore out, I heard a screech. Fluid changes were a breeze since I had a Sealey Pressure Bleeder on hand. Quote Link to comment Share on other sites More sharing options...
Paqngo Posted 10 minutes ago Share Posted 10 minutes ago https://go.skimresources.com/?id=130832X1605580&isjs=1&jv=15.7.1&sref=https%3A%2F%2F Quote Link to comment Share on other sites More sharing options...
Paqngo Posted 10 minutes ago Share Posted 10 minutes ago https://go.skimresources.com/?id=130832X1605580&isjs=1&jv=15.7.1&sref=https%3A%2F%2F Quote Link to comment Share on other sites More sharing options...
Geek2232 Posted 9 minutes ago Share Posted 9 minutes ago Depending on your destination and the discs and pads you choose to use... Until 2012, I did all of my own mining. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.