Jump to content

Replacement of discs and pads


ForumGuru

Recommended Posts

In Greece, I replaced all four sets of front brake pads about a year ago, and the original Land Rover ones cost around 170€. However, I noticed that the pads had the Ate logo stamped on them, right below the Land Rover logo, so I bought them directly from an Ate dealer in my area, where they were cheaper. Brambo discs

Link to comment
Share on other sites

I recently upgraded my bike's front brakes with Brembo Xtra discs and pads. Pads cost £55 and discs £70 apiece. In accordance with the maintenance plan, I spent an extra £19 on Pagid DOT4 from Eurocarparts and four calliper bolts and two disc screws from the main dealer. The calliper bolts could be cleaned and reused; the pistons and boots were in fine shape, and my vehicle has the smaller 300mm discs. My L538 is one of the earlier models without brake pad wear sensors, so when mine finally wore out, I heard a screech. Fluid changes were a breeze since I had a Sealey Pressure Bleeder on hand.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...