An ABS wire

[jimmy47785]

Because I have a few of ABS cables that I have removed but am unsure of their quality, I was wondering if there was a method to test them to see whether they were defective.

[CyberNinja]

Perform a multimeter resistance test.

[Howard_silver]

Could you clarify what you mean by "ABS cables"? 🤔

[jimmy47785]

The "Hold" and cruise control functions rely on the wheel-mounted speed sensor wire.

[clk320x4]

I take it that everything else is functioning well, but hold and cruise aren't? Are there no trouble signals at the cluster?

[jimmy47785]

The hold and cruise controls do not function, and the ABS warning light comes on whenever I turn the key.

[jimmy47785]

Following the advice of "sceh" in his suspension thread post, I'm going to try replacing the plugs in the brake switch and the wheel sensor.

[Howard_silver]

Instead of just throwing parts at it, get it diagnosed correctly.

[jimmy47785]

In order to optimise contacts, SCEH recommended simply unplugging them and then reconnecting them after dusting.
 

[jimmy47785]

🙃