The process of cutting compound

[ByteStorm]

Hello, I am considering applying a compound to my car's surface. Typically, I use Farecla G3 for this purpose. However, I just came across Gyeon Q2m and I am curious whether it offers superior performance compared to G3. Specifically, I would want to know if Q2m is more effective in removing scratches. whether anybody has experience with Q2m, I would appreciate your insights on this matter.

[Blu_Ray_UK2007]

In the past, perhaps 10-20 years ago, I had a strong belief in the effectiveness of Farecla products, namely G3 and G10, for my intended purposes. However, there are other superior goods available on the market at now. This particular device is much outdated in terms of performance, user-friendliness, and simplicity of cleaning when compared to its competitors.

I recommend experimenting with the 3M Perfect-It line of products. Fast Cut Plus has similarities to G3, yet with notable advantages in terms of use and performance.

Which hue are you attempting to polish?

[ByteStorm]

Greetings, someone of African descent.

[Blu_Ray_UK2007]

It would be advantageous to consider implementing a 2 or 3 stage polishing process.The thumb is a digit located on the hand, specifically on the inner side of the hand

The use of abrasive compounds such as G3, or other comparable cutting agents, may result in the formation of a subtle haze or holographic effect. In order to enhance the overall appearance and get a satisfactory outcome, it is necessary to use a gentle pad and a high-quality polish subsequent to the application of a potent substance for the purpose of augmenting shine.

[Blu_Ray_UK2007]

A minimal quantity would enough for a single vehicle, nevertheless, this package is highly recommended.

https://www.ebay.co.uk/itm/3x-1L-3M-Perfect-it-III-Fast-Cut-Plus-Extra-fine-Ultra-fine-50417-80349-50383-/222894928914?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338181125&toolid=10001&customid=2518X1570512X0ffc55ca07ff03bc0caf0a66f56e5ded

I like the user-friendly nature of the 3M system, which employs a straightforward approach via the use of color-coded pads and polishes. While there are undoubtedly other alternative choices to consider, it is worth noting that the products offered by 3M exhibit commendable quality.

 

[alpaco45]

The G3, G10, and G3 wax consistently provide satisfactory results in my experience. The cutting process is deliberately performed at a slower pace to minimise the likelihood of causing any harm or injury. Exercising patience and investing sufficient time may significantly reduce the occurrence of confusion and illusions.

[clk320x4]

Additionally, I utilise the 3m brand. The fast cut technique is quite effective.

[alpaco45]

The technique of wet sanding, also known as "wet cut," may provide excellent results when executed skillfully with the appropriate abrasive pad. However, for those lacking proficiency in this method, it may be necessary to consider a respray.

[Blu_Ray_UK2007]

If the original poster (OP) had knowledge of the G3 compound, it is likely that they will find the 3M Fast Cut Plus to be suitable.

[ML350_Colin]

I have lately used the Meguiar's Ultimate Compound on a black automobile and had really favourable results.

[EatSuru]

The decision to leave holograms or not is contingent upon the choice between using a rotary polisher or a dual action (DA) polisher. It is worth noting that the DA polisher is generally regarded as the superior option.

[ByteStorm]

I appreciate the guidance provided.